| 1. |
Remove the engine cover.
|
| 2. |
Remove the intake air hose connected to the
throttle body. |
| 3. |
Remove the accelerator
cable. |
| 4. |
Remove the P.C.V. hose and brake booster
vacuum hoses. |
| 5. |
Disconnect the vacuum hose connections, ISA
and TPS connector.
|
| 6. |
Disconnect the high pressure fuel hose
connection after relieving pressure in the fuel rail to prevent fuel
from spilling. |
| 7. |
Remove the intake
manifold. |
| 8. |
Remove the intake manifold assembly and
gasket.
|
| 9. |
Disconnect the fuel injector harness
connector. |
| 10. |
Remove the delivery pipe with the fuel
injectors.
|
Be careful not to drop the injectors
when removing the delivery
pipe. | |
| 1. |
Replace the intake manifold gasket and install
the intake manifold.
|
Be careful not to drop the injectors
when removing the delivery
pipe. | |
| 2. |
Install the delivery pipe with the fuel
injectors. |
| 3. |
Connect the fuel injector harmess
connector. |
| 4. |
Install the intake manifold
stay. |
| 5. |
Connect the high pressure fuel hose
connection. |
| 6. |
Install the P.C.V hose and brake booster
vacuum hose. |
| 7. |
Install the intake air hose to the throttle
body. |
| 8. |
Install the accelorator
cable. |
| 9. |
Connect the ISA and TPS wire harness
connector. |
Check the parts for
damage or cracking.
AIR HOSE
Check for damage or
cracking of any part.
